ga('create', 'UA-102668516-1', 'auto');
Designed & Built in Germany
Fully supported in the UK
manual dividing units
TSH - Series
HOFMANN TSH Universal tilting dividing unit , designed for light duty milling and engraving work. The rotary axis can be pivoted from 0° to 90°.
Rotary axis indexing:
Indirect indexing with worm gearing and hand wheel with micrometer dial
Direct indexing with a spring locked pin and 60 direct indexing positions
Direct indexing with a worm gearing disengaged,direct turning of indexing spindle and graduation scale on indexing spindle rim
The HOFMANN TSH swivel small indexing device can be used universally for simple machining tasks on engraving machines or on smaller drilling and milling machines.
The swivel indexing device can carry out indexing using:
the indirect indexing process using a worm drive with graduating drum
the direct indexing process with indexing bolt and 60 indexing positions
the direct indexing process with swivelled-out worm drive with degree scale on the indexing spindle and vernier scale on the housing.
Indirect indexing process using the worm drive with a ratio of i=60:1 with graduating drum.
Direct indexing process using indexing bolt and notched disc with 60 notches for the increments 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60.
Direct indexing process using the degree scale with vernier scale at the indexing spindle.
Swivelling: the indexing spindle housing can be freely swivelled by hand. It can be set to zero at the swivel bearing degree scale.